Excerpts

The applied doses of WBA had a highly significant and positive effect on the stabilization of basic soil properties.

The PDP curve of replacement rate is expected to show an overall trend of elastic modulus decrease as the recycled aggregate replacement rate increases, but the shape of this curve may not be monotonically decreasing, but rather exhibits relatively gentle changes in certain replacement rate intervals, which may be related to the bimodal distribution characteristics of high proportions of 0% and 100% replacement rate samples in the dataset, and may also suggest the existence of a certain critical replacement rate, before which the performance decline is relatively mild, and after exceeding this threshold the decline speed obviously accelerates.

Notably, Ti-15Zr-0.8O continues to show an increasing trend in yield strength, although with a reduction in compressive strain.

With the gradual increase in oxygen content, a clear trend of grain size reduction can be observed in the samples, as shown in Figure 6 .

The TCI values of the cellulose after ultrasonication showed an increasing trend with the time of ultrasound application (the highest increase after 4 h).

It can be observed that the quasi-static compression modulus and plateau stress both exhibit a decreasing trend as the horizontal cell wall length or oblique cell wall length increases.

A decreasing trend in Rk is observed with increasing inclination, suggesting improved load-bearing capacity.

The data reveal a clear trend: the number of maxima decreases with increasing periodicity, as expected.

Meanwhile, the size of Al grains still shows an increasing trend with the increase in holding time, but the increase is significantly lower than that after annealing in the first micro-rolling. 3.2.

Nevertheless, there may be significant differences in bone structure and the ratio of compact to cancellous bone between different patients.

Cement–Sand Ratio As the cement–sand ratio increased from 1:4 to 1:10, the flexural strength and compressive strength of the cemented tailings exhibited a decreasing trend.

Curing Age As the curing period extended from 7 days to 28 days, the flexural and compressive strengths of the cemented tailings showed an increasing trend.

In most cases, it was difficult to obtain a clear trend for the variations in the skewness Ssk with changes in sampling intervals.

Tensile Modulus (E t ) showed an increasing trend with the number of recycling cycles.

Results : The results showed that with an increase in sintering temperature, compressive strength showed a trend of increasing first and then decreasing, COF showed a decreasing trend first and then an increasing trend, and wear rate showed a decreasing trend that can be attributed to the different strength of the matrix and 3D mesh reinforcement structure at different sintering temperatures.

Quantitative analysis of protein expression by Western blot revealed an increasing trend of RUNX2 expression in all the experimental groups compared with the control group, suggesting that they possess clinically favorable properties in terms of bone regeneration capacity ( Figure 6 and Figure 7 ).

A significant trend is the advancement of in situ measurement techniques.

As the proportion of glyoxylic acid added increases gradually, the shear strength shows an overall trend of first increasing and then decreasing.

As the substitution ratio of the three types of RP increases, both the carbonation coefficient and the softening coefficient of RPFC show a decreasing trend.

A decreasing trend in the number-average molecular weight (Mn) of the rebiopolyols is also observed with increasing biopolyol content in the recycled foams.

As the dosage of Grade II fly ash decreases, the water absorption mass shows a decreasing trend.

With the decrease in the dosage of Class II fly ash and the increase in the dosage of slag, the compressive strength values of specimens in Groups A and B exhibited an increasing trend.

Moreover, as the angle increases, the air permeability shows a decreasing trend.

A further increase from 1100 °C to 1200 °C raises CRI from 62.55% to 65.51%, which maintains an increasing trend, but the trend tends to level off.

A notable trend is the integration of in situ diagnostics into reactor design, enabling real-time monitoring of radical generation and optimization of functional group selectivity.