Excerpts

As these microorganisms can adhere to titanium surfaces, they may be significant in the colonization of dental implants and subsequent infections [ 70 ].

The fact that the P -values were less than 0.05 indicated that the regression effects of models Y 1 and Y 2 were highly significant.

The soil conductivity above this position showed an increasing trend with rising capillary water.

With increasing corrosion time, R cp showed a trend of first decreasing and then increasing.

From Figure 3 for the results for all wood images, we can see a clear trend that observers found higher elevation prints more natural than flatter ones.

The swelling index of 2.0 phr MPP-filled NR latex films was comparable with the control sample, while ZnO NP-filled NR latex films displayed a decreasing trend in the swelling index when the loading increased.

For a feed rate of 0.16 mm/tooth, there was a slight decrease in RSm to 0.027 mm, followed by an increasing trend.

The parameter maximum peak height of the roughness profile Rp in the feed rate range 0.02 ÷ 0.06 mm/tooth ( Figure 9 a–c), showed a decreasing trend, from a maximum value of 0.818 μm to 0.552 μm.

Complex INPs The production of particles with an optimal ratio of magnetic properties and antibacterial activity has seen an increasing trend in recent years.

The surface roughness value of the vertical-plane showed a trend of first increasing and then decreasing with an increasing current density, and the roughness was the largest machined at 10 Acm −2 , which was 42 μm.

If the p -value is less than 0.01, the difference is highly significant.

The IS value also showed an increasing trend as the particle size rises.

Principal components have a decreasing trend in variance, i.e., the first principal component has the maximum variance.

A decreasing trend in density was observed due to the incorporation of RW.

The volume wear rate of as-sprayed coatings had a decreasing trend with an increase in aluminium content from 0.5 to 1.5 under dry sliding conditions.

We believe that this study may be significant for investigations on the topological physics of Weyl semimetals.

Since the probability p was lower than 0.05 for all the sample typologies reported in Table 2 , the differences between the samples welded with different parameters were considered highly significant.

Therefore, the logarithmic numbers of cycles to failure at S max = 0.75 were analysed statistically for each concrete with the purpose of evaluating possibly significant differences between both batches.

The amount of water-reducing agent needed shows an increasing trend with higher WTSP dosage.

However, as the strain rate decreased, Young’s moduli showed an increasing trend with an increase in grain size ( Figure 5 c–f).

Flexural Strength—Fiber Volume-Mixing Ratio Curve As can be seen from Figure 3 , with the increase in the volume-doping ratio of various fibers, the flexural strength of PUC at each temperature showed a trend of first increasing and then decreasing.

Accordingly, the grain size presents a decreasing trend with the substitution of Sr and the increasing Zr content of x from 0.1 to 0.4.

Generally, an increasing trend in the mechanical properties of composites is observed with the increase in the length of the fibers [ 132 ].

The mean tensile bond strength of Zirconia without visio.link adhesive group was 0.549 + 0.0375 (MPa) and for Zirconia with visio.link adhesive group it was more 1.225 + 0.0317 (MPa) and the difference between the groups was also highly significant ( p -0.000) ( Figure 9 ) ( Table 2 ).

Therefore, the comparison of the trend of the drilling temperature detected under the same experimental conditions was quite significant.