Excerpts

Additionally, they discovered an increasing trend in WA as the level of cement replaced by FA increased by more than 10%.

A notable trend can easily be observed, the 3D models employed range from digital to physical ones.

Results indicated that the ultrasonic effect was not significant for ore samples with larger particle sizes, and the appropriate increase in ultrasonic action time was beneficial to the improvement of desulfurization rate, but the effect showed a decreasing trend when it exceeded 50 min, and the best desulfurization effect was achieved when the power was 300 W.

The difference is quite significant considering that the admixture is only 0.25% by weight of cement and replaces lime in the amount of 50% by weight of cement.

Although those changes would be caused by chemical pressure effects, which is the shrinkage of unit cells and/or bonds by the decrease in the average ionic size at the M site, we found an interesting trend in the isotropic displacement parameter ( U iso ) at the M site.

It can be seen in Figure 3 a, that under different SCR and ADR conditions, internal porosity shows an increasing trend with the increase in WCR.

The experiment results showed that the uniaxial compressive strength showed a decreasing trend with the increase in WCR, while the porosity showed a gradual increase.

The fractal dimension also showed a trend of decline.

Thus, concretes with modifying additives and volumetric fiber reinforcement show more than 30% increase in flexural strength, which is a highly significant indicator, as the improvement of deformation properties and cracking resistance of concrete by using dispersed reinforcement with polypropylene fiber was the ultimate task of this study.

With enriching the Cu element and depleting the Ni content, the hardness shows a decreasing trend.

Then, a negative trend appears due to the agglomeration problems.

The elevated ridges were reduced when a low VED (63 J/mm 3 ) was used for melting the last layer, and generally had a decreasing trend with increasing the hatch angle rotation and the number of the last layers melted.

The graph has an increasing trend.

There is a decreasing trend, except in the 2.2 m and 3.0 m models.

With RCB substitution ratio in CSM, the MDD of CSM decreased gradually, while the OWC showed an increasing trend.

For any density of the GLECC mixtures, as the fiber content decreased, the flow diameter showed an increasing trend.

With the increase in FAC proportion, the compressive strength showed a decreasing trend.

As the mass fraction of La 2 O 3 increases, the depth and width of the groove show a decreasing trend.

The worn surface topography of each sample shown in Figure 11 verifies that, as the mass friction of La 2 O 3 increases, the wear resistance and wear reduction of AM alloy show an increasing trend.

Figure 9 shows a positive correlation between q u and curing period of RMLS that there is an increasing trend of q u with the increase of curing age when D R is fixed.

With the growing hydration degree, the bulk modulus, shear modulus, and elastic modulus of the cement paste all show an increasing trend, and the differences between these parameters also increase gradually.

The compressive strength of MF/SiC NWS showed a decreasing trend with increasing test temperature, but when the test temperature increased to 1400 °C, the compressive strength of MF/SiC NWS was still up to 0.45 Mpa, with strength retention of 96%, indicating its excellent thermal stability in high temperatures. 4.

It is commonly known that the twisting moment and warping moment coincide in the case of thin-walled open sections such as I-beams, and their mutual influence on the cross-sectional stress distribution might be significant.

The milling load shows an increasing trend with the increase of the milling depth a p and the feed speed v f , and the influence of a p is more obvious.

The obtained results show that milling depth is highly significant in milling load, which had a contribution ratio of 69.25%.