“an increasing trend”

The mean annual temperature is on an increasing trend, and it has increased by about 0.8 °C per decade since the 1950s.

As the exposure duration increased, the body weight of rats in each group showed an increasing trend.

They also conducted a biodistribution evaluation, which revealed an increasing trend in the uptake of radioactivity in the heart, from 1.7 ± 0.2 in wild-type mice to 2.0 ± 0.1 (%ID/g·min) in ABCB1a/b −/− mice, although this difference was not statistically significant.

The molecular weight of mechanically recycled resins has a tendency to decrease, while solvent-based recycled resins exhibit an increasing trend.

Several signal gaps were identified as falls and jumps across the spectral signatures near 513, 650, and 930 nm, while the dark current signal magnitude and variability associated with instrumental noise showed an increasing trend over time.

After that, again the safety period sees an increasing trend.

As shown in Figure 8 c, the compressive strength of HyFRDSC shows an increasing trend overall.

For Yanir et al., however, a study carried out on the Israeli population suggested an increasing trend of SNHL post-vaccination as compared to previous years prior to the vaccination [ 27 ].

Similarly, an increasing trend of maximum tensile stress with wood filler content is reported elsewhere [ 89 ].

An increasing trend in publications was observed, with Kyoko Ohno-Matsui identified as a top contributor.

5 Conclusion In conclusion, the findings from this study show an increasing trend of MRSA isolates associated with clinical infections in the UAE.

In ZRC low-, medium-, and high-dose groups, the endometrial epithelia showed an increasing trend.

Regarding to the individual kinetics of the metabolites identified, a total of 4 metabolites were found with an increasing trend in the VLCHF and VLCHF + HIIT groups along the 12 week study and without a defined trend in the HIIT and the Control group (Table 3 ).

A decreasing trend in the incidence of SSI was observed among those who underwent cardiothoracic and breast surgery and an increasing trend among those who underwent obstetric/gynaecological surgery from 2020.

As shown in Figure 9 F, the sentinel function value exhibits an increasing trend in this stage, mainly due to a smaller relative increase in cumulative energy as the mechanical energy in the specimen increases.

Among the pH conditions tested, droplets with a pH of 3.8 exhibited the highest mean homogeneous freezing temperature at −25.9 ± 0.7 °C, while the most acidic droplets (pH = −0.1) displayed the lowest mean homogeneous freezing temperature at −37.4 ± 1.9 °C. These findings suggest an increasing trend in homogeneous freezing temperatures with decreasing acidity, indicating that greater acidity can depress homogeneous ice nucleation.

The bladder and prostate cancer groups seemed to have an increasing trend in both biomarkers, compared to ACs; nevertheless, the low number of cases in these groups did not allow us to draw conclusions for these types of tumors. 2.8.

Similarly, an increasing trend of post-AMI MCs occurrence has been observed by various investigators [ 7–9 ].

An increasing trend was observed in lymphoma group over the years ( Table 4 ).

4 b, P = 0.0028, unpaired t test), and COX-2 also showed an increasing trend in normal skin tissues ( Supplementary Fig. 4 c).

This figure shows that research on crowdfunding has an increasing trend.

This study showed that: (1) The overall EEQ of YRB was at the ‘good’ grade over the past 20 years, showing an increasing trend, with the value changing from 0.70 to 0.77.

Additionally, it was observed that the antioxidant activity of the samples showed an increasing trend at different concentrations after ultrasonication.

PLC-PRF-5 cells formed the least VMs, and neither the number of nodes nor total length showed an increasing trend.

Currently, there is an increasing trend in using the PolyJet method to produce models for the medical industry, especially the dental industry [ 33 , 34 ], as well as injection molds and model sets for silicone molds used in short production runs [ 35 , 36 , 37 , 38 ].